technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http://www.microsemi.com rf0100 6 rev a, june 2010 high reliability product group page 1 of 4 devices mp4ke6.8a thru mp4ke400ca, e3 levels m, ma, mx, mxl features ? high reliability controlled devices with wafer fabrication and assembly lot traceability ? 100 % surge tested devices ? optional upscreening available by replacing the m pref ix with ma, mx or mxl. these prefixes specify various screening and conformance inspection options based on mil - prf - 19500 refer to micro n ote 129 for more d etails on the screening options . ? moisture cla ssification is level 1 with no dry pack required per ipc/jedec j - std - 020b ? rohs compliant devices available by adding e3 suffix ? 3 lot norm screening performed on standby current i d applications / benefits ? suppresses transients up to 400 watts @ 10/1000 ? s (see figure 1) ? protects sensitive components such as ics, cmos, bipolar, bicmos, ecl, dtl, t 2 l, etc. ? protection from switch i ng transients & induced rf ? compliant to iec 61000 - 4 - 2 and iec 61000 - 4 - 4 for esd and eft protection respectively. ? secondary lightning protection per iec 61000 - 4 - 5 with 42 ohms source impedance: o class 1: mp4ke5.0a to mp4ke91ca o class 2: mp4ke5.0a to mp4ke 47aca o class 3: mp4ke5.0a to mp4ke24ca o class 4: mp4ke5.0a to mp4ke12ca ? secondary lightning protection per iec 61000 - 4 - 5 with 12 ohms source impedance: o class 1: mp4ke5.0a to mp4ke30ca o class 2: mp4ke5.0a to mp4ke15ca maximum ratings ? operating and st o rage temperature: - 65 c to +150 c ? peak pulse power: 400 watts at 10/1000 ? s (see figure s 1, 2 and 3 for t w , waveform and derating effects) with impulse repetition rate ( duty factor) of 0.01 % or less ? thermal resistance: 50 c /w junction to leads @ 3/8 inch (10 mm) from body, or 110 ? c/w junction to ambient when mounted on fr4 pc board with 4 mm 2 copper pads (1 oz) and track width 1 mm, length 25 mm ? steady - state power: 2.5 watts @ t l= 25 ? c at 3/8 inch (10 mm) from body, or 1.13 w at ta = 25 oc on fr4 p c board d escribed for thermal resistance ? forward voltage at 25 ? c: 3.5 v @ 30 a with 8.3 ms half - sine wave (unidirectional only ? solder temperatures: 260 ? c for 10 s (maximum) do - 41 (do - 204al) 400w transient voltage suppressor - high reliability controlled devices - economical series for thru hole mounting - unidirectional (a) and bidirectional (ca) construction - selections for 5.8 to 342 v standoff voltages (v wm ) - fast response
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http://www.microsemi.com _________________ __________________________________________________________________________________________________________________ rf01006 rev a, june 2010 high reliability product group page 2 of 4 mechanical and packaging ? void - free transfer molded thermosetting epoxy body meeting ul94v - 0 ? tin - lead (90 % sn, 10 % pb) or rohs (100% sn) compliant annealed matte - tin plating readily solderable per mil - std - 750, method 2026 ? body marked with part number ? cathode indicated by band. no cathode band on bi - directional devices. ? available in b ulk or custom tape - and - reel packaging ? tape - and - reel s tandard per eia - 296 (add tr suffix to part number) ? weight : 0.3 gram (approximate ly ) package dimensions symbols & definitions symbol definition symbo l definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v br breakdown voltage i br breakdown current for v br i d standby current note: cathode indicated by band. all dimensions in millimeters (inches)
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http://www.microsemi.com _________________ __________________________________________________________________________________________________________________ rf01006 rev a, june 2010 high reliability product group page 3 of 4 electrical characteristics @ 25 o c microsemi part numbe r (note 2) reverse stand - off voltage v wm breakdown voltage v br @ i br maximum clamping voltage v c @ i pp maximum standby current i d @ v wm peak pulse current (see fig. 2) i pp maximum temperature coefficient of v br ? v ( br ) v v min v max ma v ? a a % / c mp4ke6.8a mp4ke7.5a 5.80 6.40 6.45 7.13 7.14 7.88 10 10 10.5 11.3 500 200 38 35 .057 .061 mp4ke8.2a mp4ke9.1a 7.02 7.78 7.79 8.65 8.61 9.55 10 1 12.1 13.4 100 20 33 30 .065 .068 mp4ke10a mp4ke11a 8.55 9.40 9.50 10.5 10.5 11.6 1 1 14.5 15.6 5 2 28 2 6 .073 .075 mp4ke12a mp4ke13a 10.2 11.1 11.4 12.4 12.6 13.7 1 1 16.7 18.2 1 1 24 22 .078 .081 mp4ke15a mp4ke16a 12.8 13.6 14.3 15.2 15.8 16.8 1 1 21.2 22.5 1 1 19 18 .084 .086 mp4ke18a mp4ke20a 15.3 17.1 17.1 19.0 18.0 21.0 1 1 25.2 27.7 1 1 16 14.5 .088 .090 mp4ke22a mp4ke24a 18.8 20.5 20.9 22.8 23.1 25.2 1 1 30.6 33.2 1 1 13 12 .092 .094 mp4ke27a mp4ke30a 23.1 25.6 25.7 28.5 28.4 31.5 1 1 37.5 41.4 1 1 11 9.5 .096 .097 mp4ke33a mp4ke36a 28.2 30.8 31.4 34.2 34.7 37.8 1 1 45.7 49.9 1 1 9.0 8.0 . 098 .099 mp4ke39a mp4ke43a 33.3 36.8 37.1 40.9 41.0 45.2 1 1 53.9 59.3 1 1 7.5 7.0 .100 .101 mp4ke47a mp4ke51a 40.2 43.6 44.7 48.5 49.4 53.6 1 1 64.8 70.1 1 1 6.2 5.7 .101 .102 mp4ke56a mp4ke62a 47.8 53.0 53.2 58.9 58.8 65.1 1 1 77.0 85.0 1 1 5.2 4.7 .103 .104 mp4ke68a mp4ke75a 58.1 64.1 64.6 71.3 71.4 78.8 1 1 92.0 103.0 1 1 4.4 3.9 .104 .105 mp4ke82a mp4ke91a 70.1 77.8 77.9 86.5 86.1 95.5 1 1 113.0 125.0 1 1 3.5 3.2 .105 .106 mp4ke100a mp4ke110a 85.5 94.0 95.0 105.0 105.0 116.0 1 1 137.0 152.0 1 1 2.9 2.6 .106 .107 mp4ke120a mp4ke130a 102.0 111.0 114.0 124.0 126.0 137.0 1 1 165.0 179.0 1 1 2.4 2.2 .107 .107 mp4ke150a mp4ke160a 128.0 136.0 143.0 152.0 158.0 168.0 1 1 207.0 219.0 1 1 1.95 1.8 .108 .108 mp4ke170a mp4ke180a 145.0 154.0 162.0 171.0 179.0 189.0 1 1 234.0 246.0 1 1 1.7 1.6 .108 .108 mp4ke200a mp4ke220a 171.0 185.0 190.0 209.0 210.0 231.0 1 1 274.0 328.0 1 1 1.5 1.0 .108 .110 mp4ke250a mp4ke300a 214.0 256.0 237.0 285.0 263.0 315.0 1 1 344.0 414.0 1 1 1.0 1.0 .110 .110 mp4ke3 50a mp4ke400a 300.0 342.0 333.0 380.0 368.0 420.0 1 1 482.0 548.0 1 1 1.0 1.0 .110 .110 note 1: forward voltage (vf) @ 30 amps peak, 8.3 ms sine wave equal to 3.5 volts maximum for mp4ke6.8a to 200a (e xcluding b idirectional). note 2: for bi directional construction, indicate a ca suffix afte r part number, e.g. mp4ke170ca. bidirectional capacitance is half that shown in figure 4 at zero volts.
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http://www.microsemi.com _________________ __________________________________________________________________________________________________________________ rf01006 rev a, june 2010 high reliability product group page 4 of 4 graphs figure 1 peak pulse power vs. pulse time test waveform parameters: tr=10 ? s, tp=1000 ? s figure 2 pulse waveform for exponential surge lead or ambient temperature o c v (br) - breakdown voltage C volts figure 3 derating curve figure 4 m p4ke typical capacitance vs. breakdown voltage (unipolar) peak pulse power ( p pp ) or continuous average power in percent of 25 o c rating c C capacitance - picofarads
|